|
Sealed Battery
Smoke Alarm with Smart HushTM
Part Number 900-0136
Model 0910
LED
Indicator
A flashing red indicator light with four modes of operation: Standby,
alarm mode, hush mode and memory set
Test/Reset Button
One button tests the units circuit operation and resets memory after an
alarm condition occurs
Smart HushTM Feature
Temporarily silences nuisance alarms. Will not allow hush to be
activated unless unit is in alarm mode.
Battery Operated
No wiring needed
Sealed-In Lithium Batteries
Unit will continue to operate for 10 years
Description
The Kidde 0910 is a
10-year, sealed battery, ionization, smoke alarm with Alarm Memory and
Smart HushTM feature. The innovative design of this alarms automatic
activation is unlike any other smoke alarm. The 0910 alarm will
automatically activate when it is attached to the mounting bracket;
there are no pull-tabs, no switches, everything is automatic.
At the end of the alarm life, the unit will
chirp, indicating the alarm is in need of replacement.
The customer can use a
simple tool such as a screwdriver to deactivate the unit, stopping the
low battery chirp and making it safe for disposal.
The sealed-in board-mounted batteries will power the 0910 unit for its
complete 10-year life. No replacement batteries will ever be needed.
This alarm uses ionization
sensing technology. Ionization sensing alarms may detect invisible fire
particles (associated with flaming fires) sooner than photoelectric
alarms. Photoelectric sensing alarms may detect visible particles
(associated with smoldering fires) sooner than ionization alarms.
Kidde strongly recommends that both
ionization and photoelectric smoke alarms be installed to help insure
maximum detection of the various types of fire that can occur within the
home
The Kidde 0910 sealed
battery operated smoke alarm features a self-activation mechanism making
installation simple and easy. It also features Smart HushTM Control
allowing consumers to temporarily silence nuisance alarms and an End of
Life Alert indicating it is time to replace the alarm.
At the end of the alarms 10-year life, deactivation of the alarm is
just as easy. Using a tool such as a small screwdriver, a deactivation
switch removes power from the alarm and renders the batteries safe for
disposal. The alarm lockout feature mechanically prevents a deactivated
unit from being mounted back on the mounting bracket.
Features and Benefits
Sealed-In Lithium Battery
Sealed-in lithium power supply; no battery replacement required over
the 10 year life of the alarm. Eliminates worry about battery removal or
unauthorized deactivation of alarm.
Self Activation Alarm
automatically activates when attached to the mounting bracket.
Alarm Memory Rapidly
flashing LED alerts user if the alarm has sounded since the last time
the test/reset button was used.
Smart HushTM Will
temporarily silence nuisance alarms and will not allow hush mode to be
activated unless the unit is in alarm mode.
Test/Reset Button Tests
units circuit operation and resets memory after an alarm condition
occurs.
End of Life Warning
Alarm chirps every 30-45 seconds indicating the alarm is in need of
replacement.
Tamper Resist (when
activated upon installation) effective in preventing someone from
removing the unit from the mounting bracket.
LED A flashing red
indicator light with four modes of operation: standby, alarm mode, hush
mode, and memory set.
Technical Specifications
Model: 0910
UPC Number: 0-47871-90136-4
Power Source: Three, 3V
Lithium batteries
Sensor: Ionization
Audio Alarm: 85dB at 10ft
Temperature Range: 40˚F
(4.4˚C) to 100˚F (37.8˚C)
Humidity Range: 5%-95%
relative humidity (RH)
Size: 5.6 in diameter x
1.55 depth
Weight: 1.5lbs
Interconnects: No
LED: Four modes of operation
Warranty: 10 year limited |