|
Intelligent Alarm
Battery Operated Combination
Carbon Monoxide, Fire & Smoke Alarm
Part Number 900-0216 Model KN-COSM-XTR-B
Voice Alarm
Announces the hazard type detected.
Test/Reset Button
Tests alarm circuitry and triggers the voice
announcement.
Combined Carbon Monoxide and
Smoke Alarm
A single unit can be installed where
previously, two were needed.
Reduces installation time and helps to keep
home dÃÃÃécor attractive.
LEDs
Two LEDs are provided. Flashing green for
normal operation
and flashing red for alarm condition.
HushÃÃÃî Feature
Temporarily silences nuisance alarms.
Description
The Kidde 900-0216 uses breakthrough
technology to offer a fastresponse to real fires, including smoldering
and fast-flaming, as wellas protect you from carbon monoxide and
dramatically reduce the
chance of nuisance alarms. In addition, the
Intelligent Alarm containsa voice warning that clearly states the
present danger smokeor carbon monoxide and announces Fire! Fire!
or Warning! Carbon Monoxide! The Intelligent Alarm combines the
detectioncapabilities of an ionization smoke sensor which is more
likely todetect smaller, less visible fire particles, like those
produced by flaming
fires with that of an electrochemical
sensor, which is used to detect CO. Since carbon monoxide is present in
all fires, having both detection chambers work together in one alarm is
a breakthrough
in the fire safety industry. When either
sensor notices a potential hazard, it will communicate with the other.
Depending on what is detected, the alarm will adjust its smoke
sensitivity in order to better
discriminate between a real hazard and a
false one. This constant communication enhances the alarms overall
performance in all fires, and significantly reduces the potential for a
nuisance alarm.
Alarm Warnings
Fire:
The red LED will flash and be accompanied by
three long alarm beeps followed by a verbal warning message FIRE!
FIRE!. The alarm will repeat pattern until smoke is eliminated.
Carbon Monoxide:
Four short alarm beeps followed by a verbal
warning WARNING! CARBON MONOXIDE! This continues until the unit is
reset or the CO is eliminated.
Low Battery:
One chirp followed by warning LOW BATTERY.
The red LED light will flash. This pattern will continue every minute
for the first hour. After the first hour the red LED light will flash
once every minute accompanied by the chirp sound. The LOW BATTERY
warning will only sound once every fifteen minutes.
Voice Hush Indication: HUSH ACTIVATED and
HUSH CANCELLED voice announcement.
Peak Level Memory: If the alarm had detected
a CO level of 100ppm or higher, the unit will announce CO PREVIOUSLY
DETECTED to warn of the CO incident, when
the Test/Reset button is pressed.
Features and Benefits
Voice Alarm Announces the hazard type
detected thereby helping to speed up the correct reaction to the hazard
detected. Alarm announces Fire Fire when a smoke or fire hazard is
detected and announces Warning Carbon Monoxide when a CO hazard is
detected.
Combined Carbon Monoxide and Smoke Alarm A single unit can be
installed where previously, two were needed. Reduces installation time
and helps to keep home decor attractive.
Test/Reset Button Tests alarm circuitry
and triggers the voice announcement.
LEDs Two LEDs are provided. Flashing
green for normal operation and flashing red for alarm condition.
Low Battery Warning The unit warns of a
low battery condition by announcing low battery and by initiating an
alarm chirp and activating a flashing red LED.
Battery Powered Provides protection even
during power outages when many fire and carbon monoxide incidents occur.
Battery Safeguard Ensures the unit
cannot be accidentally mounted without batteries installed.
HushÃÃÃî Feature Temporarily silences
nuisance alarms.
Technical Specifications
Unit Number: 900-0216
Model: KN-COSM-XTR-B
Power Source: 3 AA Battery
Sensors: Smoke: Ionization, CO:
Electrochemical
Audio Alarm: 85dB at 10ft
Temperature Range: 40˚F (4.4˚C) to 100˚F
(37.8˚C)
Humidity Range: 5%-95% relative humidity
Size: 5.75 in diameter x 1.7 depth
Weight: 13oz
Interconnects: No |