EC Digital & ECP 5+1+1 Programmable Thermostat

· Save up to 28% on heating costs.
· Even temperature control.

· Electronic temperature sensing is the most accurate technology.

· 1 minute cycle rate reduces temperature swings and increases comfort at all control settings.

· Contemporary design.

· Complies with all codes requiring anticipated or electronic thermostats.

· Single pole design with 2 wires.

· LCD display with temperature and time of day.

· White color with gray print.

· Shallow design allows more wiring room inside full electrical boxes.

· Tap key temperature settings.

· Flame icon heat indicator.

· Low battery indication.

· 16 Amps at 240V, 3840 Watts.

· 16 Amps at 208V, 3328 Watts.

· 16 Amps at 120V, 1920 Watts.

∙ Two wire installation.

· Snap action relay built-in.

· AA battery powered relay.

· Wire leads #12 AWG.

· ¾" depth into wire box.

· 40°F to 95°F (4°C to 35°C)

set point range.

· Dial program operation.

· Electronically anticipated.

· Thermistor sensor.

· Contemporary styling.

· Digital thermometer/set point.

· Large LCD display.

· Meets energy requirements.

· 1.5 degrees maximum swing.

· 3 min. delay between cycles.

· For use on all types of electric

heaters, fan-forced, baseboard,

radiant, etc.

This line voltage device should be installed and serviced by a qualified electrician. The thermostat has been designed to mount to a standard 2" X 4" electrical outlet box. Leveling of the thermostat is not required. Mounting screws are provided. Mount the thermostat about five feet above the floor in an area with good air circulation. Avoid mounting the thermostat where it will be affected by drafts, air from ducts, and radiant heat sources such as appliances, the sun or plumbing pipes.