ESP230 - 7 DAY, ELECTRONIC PROGRAMMABLE - 208/240V, 22 AMPS

Temperature Range:
44°F to 95°F (7°C to 35°C)

Temperature Default:
Your saved setting

Display Format: LCD

Illumination: Green LED

Sample Rate: Every 60 seconds

Room Temp. Display:
Large LCD

Delay: 3 minutes on or off

Accuracy: NEMA TEST
1.5°F @ 22 Amps,
1.4°F @ 16 Amps,
1.2°F @ 10 Amps,
9°F @ 4.2 Amps

Power Source:
120 VAC (ESP120),
208/240 VAC (ESP230),
50 - 60Hz

· 22 Amps at 240V, 5280 Watts.

∙ 22 Amps at 208V, 4576 Watts.

· 22 Amps at 120V, 2640 Watts.

· Three wire installation.

· Snap action relay built-in.

· 30 Amp relay (before derating).

· Wire leads #12 AWG.

· ¾" depth into wire box.

· 44°F to 95°F (7°C to 35°C) set point range.

· Single button operation.

· Electronically anticipated.

· Thermistor sensor.

· 120V or 208/240V models only.

· Contemporary styling.

· Digital thermometer/set point.

· Large LCD display.

· Meets energy requirements.

· 1.5 degrees maximum.

· 3 min. delay between cycles.

· For use on all types of electric heaters, fan-forced, baseboard, radiant, etc.

· On/Off switch for backlight.

· On/Off switch for system.

· Battery backup.

· Save up to 15% on your heating costs.

· Even temperature control.

· Electronic temperature sensing is the most
  accurate technology.

· 3 minute cycle rate reduces temperature swings and increases comfort at all control settings.

· Contemporary design.

· Complies with all codes requiring anticipated or electronic thermostats.

· Single pole design with third wire to power display.

· LCD display with temperature.

· White color with gray print.

· Shallow design allows more wiring room inside full electrical boxes.

· Tap key temperature settings.

· Red LED Heater ON Indicator.

· Backlight Display.

· System On/Off Switch.