|
|
GX Series
Global GX Automatic Hand Dryer


Dimensions: 10-1/8" W x 9-3/8" H x 5-5/8" D | • Exceptional Value & Reliability • Maintenance Free • Vandal Resistant • Quite, Dependable Operation • 5 Year Limited Warranty |
|
Click on the part number below to order. |
| GX1 | ABS White | Surface | 110-120 | 12.5 | 1500 |
| | GX3 | ABS White | Surface | 208-240 | 6.5 | 1500 |
| | GX1-M | Steel White | Surface | 110-120 | 12.5 | 1500 |
| | GX3-M | Steel White | Surface | 208-240 | 6.5 | 1500 |
| | GX1-MR | Steel White | Semi-Recessed | 110-120 | 12.5 | 1500 |
| | GX3-MR | Steel White | Semi-Recessed | 208-240 | 6.5 | 1500 |
| | GX1-C | Chrome | Surface | 110-120 | 12.5 | 1500 |
| | GX3-C | Chrome | Surface | 208-240 | 6.5 | 1500 |
|
Global GX Automatic Hand DryerOverview:The GX automatic hand dryers offer the best value in a maintenance-free hand dryer. The GX is designed to provide many years of trouble-free service. The stylish, compact design provides great performance while consuming less electricity.
Options include a heavy-duty steel cover with a durable white epoxy finish or a chrome plated satin finish. A recess kit is available to reduce the mounting depth to less than 4 inches. Construction Features:– One-piece heavy duty, flame retardant ABS polymer with white finish. Optional one-piece 18 gauge steel cover finished with electro statically applied, chip-resistant white epoxy finish (M), or chrome plated satin finish (C). – Permanently lubricated, maintenance-free, brushless induction motor with automatic resetting thermal protector. 1/12 HP, 3200 RPM. – 100% solid state design eliminates relay contact failures. Microprocessor controlled infrared sensor turns dryer on when hands are under the air outlet. Dryer turns off when hands are removed. Override turns off in 80 seconds if hands are not removed. – Constructed of NiChrome resistance wire with automatic resetting thermostat. Heating element operates in the black range for maximum life. – Two tamper resistant screws secure cover to base.
GENERAL INFORMATION
Dryers should be placed at least 2 feet apart and at least 12” from washbasin. Do not install dryer over washbasin. Automatic dryers should be at least 18” above any projection which may interfere with the operation of the automatic sensor.
Hand dryers require a dedicated circuit (max. 20 amp) and must be properly grounded. One side of dryer should be mounted to stud. All surface mount dryers are provided with conduit entrances for both between wall and surface wiring.
Average traffic washroom..............1 dryer per 2 washbasins Heavy traffic washroom..................1 dryer per washbasin 54” Wash fountain..........................4 dryers per sink
|
|
|
I received my heater this
morning - less than 24 hours after placing the order! That is amazing
service. Thank you for your prompt response. Your company will be among my
"favorites" for Internet orders.
Dan
|
|