|
|
Home > Infrared Spot Heat
Infrared Spot Heat
|
Infrared "Spot" Heat
Quartz
Infrared Spot Heaters
|
|
CH-46 |
CH-57 |
|
Length: 44.4" |
Length: 55.4" |
|
Width: 5.4" |
Width: 5.4" |
|
Height: 6.5" |
Height: 6.5" |
MOUNTING CLEARANCES
3" from ceiling
12" from vertical surface
36" from another heater
24" from face of heater to combustible surface
|
• 60° symmetrical heat pattern
• Quartz tube included
• Bright aluminum reflector and end caps
• 6' long - 3-wire (14/3) cordset with plug that can
be
removed for direct wire installations
• Two 2' mounting chains and 4 S-hooks included for
chain mounting or unit can be surface mounted using optional brackets (CH-MB)
which allow up to a 45o horizontal tilt adjustment
• UL / C-UL listed for indoor or semi-protected
outdoor applications
• Heats Solid Objects Not The Air |
Click on the part number below to order.
Options
Recommended Mounting Height:
CH-46 7' to 9'
CH-57 8' to 10'
Utility
Infrared Heaters
|
FFH-512A |
FFH-912A |
Mounting Clearances
3” from ceiling, 24” from vertical surface, 72” from face of heater to
combustible surfaces
Note: FFH’s operate with a 15-Amp NEMA 5-15P plug
|
• The FFH-912B unit includes a dual element design
and offers (2) On/Off toggle switches to operate elements independently.
• 8’ 18/3 cord with molded plug.
• Supplied with Quartz Tube heating element(s), wire guard, and (2) 4’ Jack
Chains for suspension mounting.
• To achieve optimum infrared heating results, do not exceed mount heights of
10’ and tilt heaters 15º inward towards target.
• FFH-512A – Gold Anodized Finish
• FFH-912B – Brown Enamel Finish |
Sizing Chart
Click on the part number below to order.
|
|
|
883894 |
FFH-512A |
550 |
1,877 |
120 |
5 |
1 |
671-3492 |
4 1/2"W x 3.3"H x 22"L |
$94.00 |
|
882781 |
FFH-912B |
450/900 |
3,072 |
120 |
8 |
2 |
671-3454 |
5.8"W x 4.8"H x 16.5"L |
$170.00 |
Suspended/Portable Quartz Infrared Heaters
|
Chain Mounted
Mounting Height recommended at 7’ to 10’ from the ground.
Mounting Clearances:
- Minimum 24'' from vertical surface or 6’ from combustibles - Minimum 24''
from ceiling - Mount at least 36'' apart |
• 60° symmetrical heat pattern
• Quartz tubes and built in wire guards
included
• Interior or protected outdoor use only
• GOLD anodized aluminum reflector and end caps |
Shown With Optional FHK-1 Cart
|
MODEL CH 2212-1C has two 1000 watt elements that can be switched on / off by
toggle switches to produce 1000 watts or 2000 watts of heat. - 15’ cord and NEMA
5-20 molded plug.
MODEL CH 6424-1C has two sets of 1425 watt elements that can be switched on
/ off by toggle switches to produce 2850 watts or 5700 watts of heat. - 15’ cord
and NEMA L6-30 twist lock plug.
Click on the part number below to order.
Portable Electric Infrared Heaters
Heavy Duty Metal Sheath Elements
|
2.0 KW & 4.5 KW
STAND
|
• Double side walls to reduce operating temperatures
• 6.0 and 13.5KW heaters have double top baffles to reduce operating
temperatures.
• Factory installed U-shaped metal sheath infrared heating elements have an
average 5000 hour life
• Heavy duty protective wire screens
• GOLD anodized aluminum internal reflector
• Consult factory for 208V, 277V or 600V units |
6.0KW & 13.5KW
HAND CART |
Click on the part number below to order.
Optional Controls
|
485814 |
TO-SK-1 |
Tip-Over Switch with on-off toggle switch |
208V - 600V |
$168.00 |
|
589376 |
DC-SK-1 |
Disconnect Switch |
120V - 600V |
$152.00 |
|
486026 |
GF-SK-1 |
Ground Fault Sensing Switch to prevent dynamic
element failure |
208V - 600V |
$331.00 |
Only one optional control can be mounted on a 6KW or
13.5KW unit.
Additional control units if desired can be wall
mounted.
| |
|
I received my heater this
morning - less than 24 hours after placing the order! That is amazing
service. Thank you for your prompt response. Your company will be among my
"favorites" for Internet orders.
Dan
|
|